Services
Electronics design services
Turnkey embedded product development, or any single discipline on its own. Most clients start with one board and a deadline; some start with a schematic that needs a second opinion before it goes to fabrication.
Product development
Any idea, brought to reality. Feasibility through prototype to a product you can manufacture.
PCB design
From blank sheet to fabrication package — including the high-speed work most shops sub-contract.
Embedded hardware
The whole board: silicon selection, architecture, schematic, layout, RF, power and bring-up under one accountability.
System-on-Module design
SMARC, OSM and LGA modules designed end to end — pin-out definition, DDR fly-by routing, power tree, fabrication package.
Carrier board design
The board your module plugs into: evaluation kits, adapters, and production carriers.
Rigid-flex design
When there is no room for connectors and no tolerance for a harness that shakes loose.
RF & wireless
Getting the radio to work on a crowded board — LoRa, Wi-Fi 6, cellular, GNSS and RTK.
Power & battery
Rails that hold under load, batteries that report honestly, and shutdowns that don't corrupt storage.
Bring-up & firmware
First power-on to a booting board — then the firmware that makes the hardware demonstrable.
EMC & pre-compliance
Most EMC failures are designed in months before the chamber. This is the work that prevents them.
Design review
An independent read of your design before you spend money on it being wrong.
Reverse engineering
Recovering a board nobody has source files for — and rebuilding it so you own it.
Engagement models
Three ways to work together
Fixed-price concept phase
Silicon selection, block diagram, interface and power budgets, risk register and a written recommendation. Priced before it starts, and yours to keep whether or not the project continues.
Project delivery
Concept to fabrication package to bring-up, against a task-level estimate in person-days. Review gates at agreed points so nothing is a surprise at handover.
Staff augmentation
Your project, your tools, your process — an extra senior hardware engineer for a defined period. Useful when the constraint is capacity rather than capability.
Full IP transfer, every time. Native source files, not just outputs. EU jurisdiction. You should never be locked to a design house by a file format — and if you ever want to take the design elsewhere, everything needed to do that is already in your hands.
Got a board to design — or one that won’t boot?
You talk to the engineer who would do the work. Reply within one business day, and we’ll sign your NDA before you go into detail.